All projects
Fix

Clean, sharpen and oil your pruners

Twenty minutes at the bench and your bypass pruners cut like new. Do it before they go on the wall for the winter.

Difficulty
Easy
Time
45 min
Season
Fall

Posted

Clean, sharpen and oil your pruners

Potting Bench Notes

Tools and materials

Clean, sharpen and oil your pruners

Tick things off as you gather them.

Sap and rust are what make pruners crush stems instead of cutting them. Clean blades and a fresh edge fix most of it.

  1. Scrub the blades with warm soapy water and dry them well.
  2. Rub off any rust with steel wool.
  3. Hold the file at the same angle as the bevel and draw it along the cutting blade, heel to tip, until it shines evenly. Sharpen the bevelled side only.
  4. Take a light pass on the flat back to knock off the burr.
  5. Oil the pivot and spring, open and close a few times, and wipe off the extra.

If they still pinch

Check the pivot nut. A quarter turn tighter often stops the blades from twisting apart on thick stems.

Get the next project in your inbox

One email when a new project goes up on Potting Bench Notes, with what it takes and a link to the materials list.

Potting Bench Notes

New projects by email

Leave your email to hear about new projects: things to plant, build, fix and paint, each with its materials list.

A question about a project? Write to hello@pottingbenchnotes.com