All projects
Build
Build a slatted compost bin from scrap boards
Four corner posts, a pile of boards and a gap between each one for air. A bin you can take apart to turn the heap.
- Difficulty
- Weekend project
- Time
- 1 to 2 days
- Season
- Any time
Posted
Potting Bench Notes
Tools and materials
Build a slatted compost bin from scrap boards
Tick things off as you gather them.
A compost heap works faster when it's held together and gets air from every side. This bin is a square of slatted walls with one side that lifts out board by board.
- Cut the boards to length. Odd scraps are fine as long as they're the same length.
- Lay two posts on the ground and screw boards across them, leaving a finger's width between each one. That's one wall. Make three.
- Stand the walls up in a U and screw the corners together.
- For the front, screw two strips to the inside of the side walls to make a slot, and drop loose boards into it.
- Fill it with layers of green scraps and brown leaves, and keep it as damp as a wrung-out sponge.
To turn the heap, lift out the front boards and fork it over.